如何在CST MWS瞬態仿真中加入余弦波激勵？

比如利用waveport或者是plane wave激勵時如何能將端口的default設置為余弦波激勵呢？是否需要用到宏？或者瞬態仿真中是否支持余弦波激勵呢？達人們，顯身吧！

可以在port type中選擇Selection，然后再點擊Excitation List，在打開的對話框中設置即可。

自定義脈沖激勵就可以解決啊。

New Excitation Signal >>User Defined>>此時會出現VBS編程的畫面，但是如何通過編程來定義單頻點的余弦函數激勵呢？瞬態仿真支持單頻點仿真嗎？因為在瞬態仿真中，仿真的停止是依據能量在所激勵的結構中消逝到足夠小的時候來界定的，如果是單頻點的余弦波激勵那么能量將會最終在結構中達到一個穩態，試問這種激勵瞬態仿真支持嗎？
試著用了上上樓的方法，通過導航樹觀察激勵信號仍然是一個正弦調制的高斯脈沖，因此仍然 in doubt中。

定義了VBA激勵信號后，要在port type中選擇Selection，然后再點擊Excitation List，在打開的對話框中激活A(yù)ctivitate選項進行同時激勵，然后將Signal選擇為自定義的余弦信號即可。
CST中有個專門介紹如何自定義激勵信號的HowTo（幫助文檔）。還有疑問的話，郵件到CST問也可以的。

謝謝樓上的回復。宏定義功能還沒試過，因此不知如何去定義激勵信號。達人們，給點提示吧。
' userdefined excitation function
Option Explicit
Function ExcitationFunction(dtime As Double) As Double
'Assign the excitation signal value for the given time to the function name.
ExcitationFunction = 0.0
End Function
' -------------------------------------------------------------------------------------------------
' Main: This function serves as a main program for testing purposes. (runs and plots the function)
' You need to rename this function to "Main" for debugging the excitation function.
'
' Please adjust the time step width and the number of time steps accordingly.
'
' PLEASE NOTE that a userdefined excitation file (*.usf) must not contain a main program for
' proper execution by the framework. Therefore please ensure to rename this function
' to e.g. "Main2" before the Transient Solver is started
' -------------------------------------------------------------------------------------------------
Sub Main2
Dim tmax As Double, ntstep As Long
' -------------- PLEASE ADJUST THE SETTINGS BELOW ----------------------
tmax = 10.0
ntstep = 100
' -------------- PLEASE ADJUST THE SETTINGS ABOVE ----------------------
Dim signal As Object, n As Long, tstep As Double
Set signal = Result1D("")
signal.Initialize ntstep
tstep = tmax / ntstep
For n=0 To ntstep-1
signal.SetXY(n, n * tstep, ExcitationFunction(n * tstep))
Next n
signal.Save GetProjectBaseName() + GetProjectBaseNameSeparator() + "excitation function.sig"
signal.AddToTree "Excitation SignalsUserdefined Functionssignal1_plot"
SelectTreeItem "Excitation SignalsUserdefined Functionssignal1_plot"
ResultTree.RefreshView
End Sub

我在自定義脈沖中定義了一個正弦調制的脈沖，能出來plot，但我怎么讓這個自定義的脈沖作為激勵源呢？也就是怎么把自定義的脈沖調出來？拜求回答，以下是宏語言
' userdefined excitation function
Option Explicit
Function ExcitationFunction(dtime As Double) As Double
'Assign the excitation signal value for the given time to the function name.
Dim E As Double,f As Double,t As Double,d As Double
f=3e9
t=1.5e-9
d=7.0711e-10
E=1e5
ExcitationFunction = E*Cos(2*pi*f*dtime)*Exp(-(dtime-t)^2/d^2)
End Function
' -------------------------------------------------------------------------------------------------
' Main: This function serves as a main program for testing purposes. (runs and plots the function)
' You need to rename this function to "Main" for debugging the excitation function.
'
' Please adjust the time step width and the number of time steps accordingly.
'
'PLEASE NOTE that a userdefined excitation file (*.usf) must not contain a main program for
' proper execution by the framework. Therefore please ensure to rename this function
' to e.g. "Main2" before the Transient Solver is started
' -------------------------------------------------------------------------------------------------
Sub Main
Dim tmax As Double, ntstep As Long
' -------------- PLEASE ADJUST THE SETTINGS BELOW ----------------------
tmax =10e-9
ntstep =100
' -------------- PLEASE ADJUST THE SETTINGS ABOVE ----------------------
Dim signal As Object, n As Long, tstep As Double
Set signal = Result1D("")
signal.Initialize ntstep
tstep = tmax / ntstep
For n=0 To ntstep-1
signal.SetXY(n, n * tstep, ExcitationFunction(n * tstep))
Next n
signal.Save GetProjectBaseName() + GetProjectBaseNameSeparator() + "excitation function.sig"
signal.AddToTree "Excitation SignalsUserdefined Functionssignal2_plot"
SelectTreeItem"Excitation SignalsUserdefined Functionssignal2_plot"
ResultTree.RefreshView
End Sub

Option Explicit

Function ExcitationFunction(dtime As Double) As Double

'Assign the excitation signal value for the given time to the function name.

ExcitationFunction =cos(2*3.14*dtime)

End Function
類似上面這樣將你的余弦激勵加入， 如果你想看波形，就將下面的Sub Main2改為Sub Main，運行一下看看結果，如果結果波形不對，則需要修改tmax，最后波形正確后，將Sub Main改回Sub Main2，保存即可

你這個自定義源plot之后，需要將Sub Main改回Sub Main2，然后保存。因為Sub Main僅作調試用