- HFSS15在線幫助
- 首頁
- HFSS教學
- HFSS 15 在線幫助文檔
Specifying Solution Settings > Adding a Frequency Sweep
Selecting the Sweep Type
For Driven solution types.
Specify the type of sweep you want to perform in the Edit Sweep dialog box. Choose one of the following sweep types:
Fast Sweep Options |
Generates a unique full-field solution for each division within a frequency range. Best for models that will abruptly resonate or change operation in the frequency band. A Fast sweep will obtain an accurate representation of the behavior near the resonance. Fast sweeps are disabled if an anisotropic boundary condition is present. |
Discrete Sweep Options |
Generates field solutions at specific frequency points in a frequency range. Best when only a few frequency points are necessary to accurately represent the results in a frequency range. |
Interpolating Sweep Options (default) |
Estimates a solution for an entire frequency range. Best when the frequency range is wide and the frequency response is smooth, or if the memory requirements of a Fast sweep exceed your resources. All discrete basis solutions are solved prior to interpolating sweeps because it is possible that an interpolating sweep can re-use already solved frequencies from a discrete sweep. For Time Domain Reflectometry plots (TDR), you must use an interpolating sweep. When you select Interpolating sweeps in the Edit Sweep dialog, the Interpolation options tab is activated. This lets you specify a maximum number of solutions, and other interpolation values. |
If you expect to use the same option settings often, you can click the Set Defaults button. To use previously saved settings, click the Use Defaults button.
Related Topics
Adding a Frequency Sweep
Technical Notes: Frequency Sweeps
-
國內最全面的HFSS培訓課程,包含7套視頻教程和2本教材,資深專家講解,視頻操作演示,結合最新工程案例,讓HFSS學習不再難...【詳細介紹】